Only individuals trained in the safe operation and use of this type of equipment should use this equipment, and in addition to these basic safety precautions, the same safety rules and precautions apply to Intel-A-Jib™ and or Intel-A-Head™ as to any other camera mounting equipment.
User must read set-up instructions and all safety labels, and at all times observe load capacity ratings of Intel-A-Jib™ and or Intel-A-Head™.
When mounting the Intel-A-Jib™ and camera package, make sure that the tripod or other mounting support is sufficiently rated and suitable for the total weight load including the Intel-A-Jib™ camera package and counterbalance weights.
When mounting the Intel-A-Jib™ on a dolly, a center support must be used.
User must periodically inspect the Intel-A-Jib™ and or Intel-A-Head™ and all related hardware and components prior to and during use to ensure that they are stable and secure, and all hardware and fittings are tight.
User must periodically inspect all tripods, dollies or other Intel-A-Jib™ mounts prior to and during use to ensure that they are stable and secure, and all hardware and fittings are tight.
When inserting connector pins, make sure that they are fully inserted to lock properly into place.
Do not use the Intel-A-Jib™ near high voltage or exposed electrical wires.
Do not use any Intel-A-Jib™ that has damage or is missing components.
Do not use the Intel-A-Jib™ for any purpose other than its intended use.
Do not use additional arm sections from other Intel-A-Jib™ units to lengthen Intel-A-Jib™ past its maximum reach (10’), except additional accessory arm extensions supplied by Intel-A-Jib/IAT, Inc. that are specifically for this purpose.